Friday, October 22, 2010

Plumbing & Door Install | Bus Conversion

Today I started off by working more on the sewage tank vent. I attached a pipe to the vent that will also act as a drain for the washer/dryer combo unit that is on it's way to us.



This is where it comes out under the bus:



Next I installed the outlet to provide power for the washer/dryer.



After that I worked on the treating and priming the original stair treads.





Then I primed the new stair treads that I had made:



Next I went up to the metal shop and had metal cut to skin the framing around the door. Here is the door set in place temporarily.



More Soon!

No comments: